PrecidiumTM a novel fire resistant polymer.
PrecidiumTM produces extremely durable and fire resistant components. PrecidiumTM can be spray and injection moulded or spray applied to a wide range of substrates.
The rapid cure rate of PrecidiumTM allows fast return to service in retrofit applications and rapid deployment in OEM applications.
PrecidiumTM is used where all the benifits of durability and performance are needed, and where life safety is paramount, such as marine applications, passenger rail and mass transit.
Properties
Applications
Contact Information
Links
Click here for a printable PDF report
|
Description
PrecidiumTM 550D-FR is a fire resistant, zero VOC, high
performance polyurea elastomer. System 550D-FR is
designed to provide a flame resistant, durable,
chemical resistant lining for secondary containment
applications and as a surface coating for metal,
concrete or wood.
PrecidiumTM 550D-FR is a fast set system which allows
fast “return to service”. It is intended for use with plural
component spray equipment with a mix ratio of 1 to 1.
Properties
Flame Spread Classification
(ASTM E84) |
20 |
Smoke Developed Classification
(ASTM E84) | 115 |
| Service Temperature | -50 to 200 C |
| Shore Hardness | 50D approx. |
| Elongation | 200% |
| Tensile Strength | 1500-2000 psi |
Storage
Store in a cool and dry place for product integrity. Store
in tightly sealed containers to protect from moisture and
foreign materials.
Product Safety
For details an MSDS is available from Quantum Coatings.
*Approximate values only. Should not be considered specifications.
This data sheet is intended for general information only.
Updated: November 1, 2001
|
Instructions
For application use a regulated high-pressure proportioner
(1:1) and spray gun system capable of producing 2000 -
2500 psi. Thoroughly mix RESIN for 45 to 60 minutes prior
to use. Preheating RESIN may be necessary to achieve
uniform mix. Check that no residue is left on bottom of
drum after mixing.
Recommended Heat Settings.
Line/Pre-Heaters 150 - 160 F
Hose Heat 150 - 160 F
Apply only to properly prepared substrate. Apply first coat
at less than 10 mil and allow to become tack free before
continuing. Apply following coats at 20 mil per coat and
allow surface to become tack free before application of
subsequent coats. Spray with uniform motion and allow
50 to 75% overlap.
Features
- Flame resistance.
- Excellent abrasion resistance.
- Highly resistant to impact over wide temperature
range.
- Resistant to cracking under high flex conditions.
- Remains flexible at low temperature.
- Resistant to water and a wide range of chemicals.
Availability
System 550D-FR is packaged in 50 US Gallon
drums.
Other
The purchaser of this product must rely on his own
judgement in determining suitability for his purpose, and
in applying directions as to handling and use. Quantum
makes no warranty, expressed or implied, except that if
this product proves on inspection to be defective,
Quantum will replace it or refund the purchase price.
Labour costs and other consequential damages are
hereby excluded. No representative or purported agent
of Quantum has the authority to change this warranty.
|
Toll Free: 1-877-454-9166
Telephone: 1-780-454-9166
Facsimile: 1-780-488-6134
E-mail: info@quantumchemical.com
Quantum Technical Services Ltd., 14601 - 134 Avenue, Edmonton, AB, Canada T5L 4S9
